Search Results

Search found 3536 results on 142 pages for '8 04'.

Page 61/142 | < Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >

• Wireless not detected on an hp Pavilion g6

  - by Earl Larson

  I just bought an HP Pavilion g6 laptop and I installed Natty Narwhal alongside Windows 7. In Windows 7, my WiFi works perfect but in Ubuntu it absolutely (no matter what I do) won't detect my home WiFi network. Here is the output of "lspci": earl@ubuntu:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200] 01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 03:00.0 Network controller: Ralink corp. Device 5390 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01) earl@ubuntu:~$

  Read the article

• How do I add and/or keep subtitles when converting video?

  - by JoeSteiger

  I have a mkv video I want to convert to mp4, but every which way I try and convert it (Handbrake, WinFF, ffmpeg, mencoder,...I lose the video's subtitles. How can I convert the video,keeping the subtitles, or add a subtitles.srt? I also would like 2 pass encoding with a video bitrate of 4054 and audio bitrate of 160. Thanks. I was asked for the ffmpeg -i: joe@joe-Leopard-Extreme:/media/Elements/Home Folder/Videos$ ffmpeg -i iron.mkv ffmpeg version 0.8.3-4:0.8.3-0ubuntu0.12.04.1, Copyright (c) 2000-2012 the Libav developers built on Jun 12 2012 16:52:09 with gcc 4.6.3 *** THIS PROGRAM IS DEPRECATED *** This program is only provided for compatibility and will be removed in a future release. Please use avconv instead. [matroska,webm @ 0x1a319a0] Estimating duration from bitrate, this may be inaccurate Input #0, matroska,webm, from 'iron.mkv': Metadata: title : Iron Duration: 02:06:01.67, start: 0.000000, bitrate: 1280 kb/s Chapter #0.0: start 0.000000, end 546.170622 Metadata: title : Chapter 00 Chapter #0.1: start 546.170622, end 1080.579489 Metadata: title : Chapter 01 Chapter #0.2: start 1080.579489, end 1609.941667 Metadata: title : Chapter 02 Chapter #0.3: start 1609.941667, end 2101.849733 Metadata: title : Chapter 03 Chapter #0.4: start 2101.849733, end 2595.259333 Metadata: title : Chapter 04 Chapter #0.5: start 2595.259333, end 3158.488667 Metadata: title : Chapter 05 Chapter #0.6: start 3158.488667, end 3564.644400 Metadata: title : Chapter 06 Chapter #0.7: start 3564.644400, end 4052.423356 Metadata: title : Chapter 07 Chapter #0.8: start 4052.423356, end 4304.300000 Metadata: title : Chapter 08 Chapter #0.9: start 4304.300000, end 4711.206489 Metadata: title : Chapter 09 Chapter #0.10: start 4711.206489, end 5080.575489 Metadata: title : Chapter 10 Chapter #0.11: start 5080.575489, end 5700.111067 Metadata: title : Chapter 11 Chapter #0.12: start 5700.111067, end 6269.346400 Metadata: title : Chapter 12 Chapter #0.13: start 6269.346400, end 6811.471333 Metadata: title : Chapter 13 Chapter #0.14: start 6811.471333, end 7561.679000 Metadata: title : Chapter 14 Stream #0.0(eng): Video: h264 (High), yuv420p, 1920x1080 [PAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc Stream #0.1(eng): Audio: ac3, 48000 Hz, 5.1, s16, 640 kb/s (default) Metadata: title : 3/2+1 Stream #0.2(ita): Audio: ac3, 48000 Hz, 5.1, s16, 640 kb/s Metadata: title : 3/2+1 Stream #0.3(eng): Subtitle: pgssub (default) Stream #0.4(eng): Subtitle: pgssub Stream #0.5(eng): Subtitle: pgssub Stream #0.6(eng): Subtitle: pgssub At least one output file must be specified joe@joe-Leopard-Extreme:/media/Elements/Home Folder/Videos

  Read the article

• Compiz Fusion And Unity Tool

  - by David Michael Rice

  I tried to install compiz fusion on ubuntu studio 13 and all I got was this Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: compiz-fusion-plugins-extra:i386 : Depends: compiz-core:i386 but it is not going to be installed Depends: compiz-fusion-plugins-main:i386 but it is not going to be installed Recommends: compizconfig-settings-manager:i386 but it is not going to be installed compiz-gnome : Depends: libcompizconfig0 but it is not going to be installed compizconfig-settings-manager : Depends: python-compizconfig (>= 1:0.9.9~daily13.04.18.1~13.04-0ubuntu1) but it is not going to be installed libcompizconfig-backend-gconf:i386 : Depends: libcompizconfig0:i386 but it is not going to be installed E: Unable to correct problems, you have held broken packages. david@Nebuchadnezzar:~$ Also I installed Unity tweak tool through the software center, and now I cannot find it at all, not even in search apps. I feel like every time I try to install something I have to jump through flaming hoops...

  Read the article

• Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs)

  - by simpleton

  I downloaded 12.04.1 and md5 sum checked them and everything is good. Made a live usb and booted up... Just gets to where its about to start with the purple ubuntu loading screen then it goes back to text and gives this message: BusyBox v1.18.5 (Ubuntu 1:1.18.5-1ubuntu4) built-in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) mount: mounting /dev/loop0 on ///filesystem.squashfs failed: Input/output error Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs This happens in the live option, or persistent even the file checking one doesn't work Also I've tried a few different F6 options to no avail. I used 'LiLi USB creator' and 'unetbootin' and also 'Universal USB Installer,' all with the same results. I've also tried using a VM and it showed the same. That is when I figured I had a corrupt .iso so I downloaded it again checked the MD5: e235b63c02644e219b7bf3668f479c9e. Only I'm having the same problem. I'm just about ready to give up on 12.04.1 and just go back to 10.04 utill the next LTS comes out. I've got a dell mini 10 btw. Thanks for your time.

  Read the article

• Disk failure is imminent Laptop Hard drive ~5 months old

  - by Drew

  There's another post about this, but I don't have enough 'points' to say anything on that thread. So I'll start my own ... with more details! My computer still boots, but gnome domain reports problems with HDD smart. This has been confirmed in the bios as it makes me press f1 to boot up now. I tried running HDD disk check in the bios, but it fails running the tests. As in, running the tests failed not that the tests themselves indicated a failed drive. Here is what disk utility is reporting as failing: Reallocated Sector Count FAILING Normalized: 132 Worst: 132 Threshold: 140 Value: 544 Current Pending Sector Count WARNING Normalized: 200 Worst: 1 Threshold: 0 Value: 2 Is this related to the insane number of DRDY errors on the drive? kernel: [51345.233069] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 kernel: [51345.233076] ata1.00: BMDMA stat 0x4 kernel: [51345.233081] ata1.00: failed command: READ DMA kernel: [51345.233090] ata1.00: cmd c8/00:00:00:8b:4a/00:00:00:00:00/e0 tag 0 dma 131072 in kernel: [51345.233092] res 51/40:00:a8:8b:4a/10:04:00:00:00/e0 Emask 0x9 (media error) kernel: [51345.233097] ata1.00: status: { DRDY ERR } kernel: [51345.233103] ata1.00: error: { UNC } kernel: [51345.291929] ata1.00: configured for UDMA/100 kernel: [51345.291944] ata1: EH complete kernel: [51347.682748] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 kernel: [51347.682754] ata1.00: BMDMA stat 0x4 kernel: [51347.682759] ata1.00: failed command: READ DMA kernel: [51347.682768] ata1.00: cmd c8/00:00:00:8b:4a/00:00:00:00:00/e0 tag 0 dma 131072 in kernel: [51347.682770] res 51/40:00:a8:8b:4a/10:04:00:00:00/e0 Emask 0x9 (media error) kernel: [51347.682774] ata1.00: status: { DRDY ERR } kernel: [51347.682777] ata1.00: error: { UNC } Did Ubuntu 10.10 and/or EXT4 eat my work laptop? What steps can I take to backup my important information, which is probably the home folder. Please include steps to recover my data on the new hard drive as well. It does me little good to have backups I can't use.

  Read the article

• The internal storage of a DATETIMEOFFSET value

  - by Peter Larsson

  Today I went for investigating the internal storage of DATETIME2 datatype. What I found out was that for a datetime2 value with precision 0 (seconds only), SQL Server need 6 bytes to represent the value, but stores 7 bytes. This is because SQL Server add one byte that holds the precision for the datetime2 value. Start with this very simple repro declare    @now datetimeoffset(7) = '2010-12-15 21:04:03.6934231 +03:30'   select     cast(cast(@now as datetimeoffset(0)) as binary(9)),            cast(cast(@now as datetimeoffset(1)) as binary(9)),            cast(cast(@now as datetimeoffset(2)) as binary(9)),            cast(cast(@now as datetimeoffset(3)) as binary(10)),            cast(cast(@now as datetimeoffset(4)) as binary(10)),            cast(cast(@now as datetimeoffset(5)) as binary(11)),            cast(cast(@now as datetimeoffset(6)) as binary(11)),            cast(cast(@now as datetimeoffset(7)) as binary(11)) Now we are going to copy and paste these binary values and investigate which value is representing what time part. Prefix  Ticks       Ticks         Days    Days    Suffix  Suffix  Original value ------  ----------  ------------  ------  ------  ------  ------  ------------------------ 0x  00  0CF700             63244  A8330B  734120  D200       210  0x000CF700A8330BD200 0x  01  75A609            632437  A8330B  734120  D200       210 0x0175A609A8330BD200 0x  02  918060           6324369  A8330B  734120  D200       210  0x02918060A8330BD200 0x  03  AD05C503        63243693  A8330B  734120  D200       210  0x03AD05C503A8330BD200 0x  04  C638B225       632502470  A8330B  734120  D200       210  0x04C638B225A8330BD200 0x  05  BE37F67801    6324369342  A8330B  734120  D200       210  0x05BE37F67801A8330BD200 0x  06  6F2D9EB90E   63243693423  A8330B  734120  D200       210  0x066F2D9EB90EA8330BD200 0x  07  57C62D4093  632436934231  A8330B  734120  D200       210  0x0757C62D4093A8330BD200 Let us use the following color schema Red - Prefix Green - Time part Blue - Day part Purple - UTC offset What you can see is that the date part is equal in all cases, which makes sense since the precision doesn't affect the datepart. If you add 63244 seconds to midnight, you get 17:34:04, which is the correct UTC time. So what is stored is the UTC time and the local time can be found by adding "utc offset" minutes. And if you look at it, it makes perfect sense that each following value is 10 times greater when the precision is increased one step too. //Peter

  Read the article

• What is the difference between apt-get and dpkg?

  - by William F. Hammond

  Both apt-get and dpkg can be used to install and remove packages. When to use which? Context: I'm in stuck in package limbo between 10.04.4 LTS and 12.04.1 LTS after an attempted upgrade via the package manager. For example, to fix things I wanted to remove "skype" so that things it depends on could be freed up. But "aptitude" (my normal package management tool) refused to remove it. The advice at http://administratosphere.wordpress.com/2011/11/02/rescuing-an-interrupted-ubuntu-upgrade/ seems helpful but not adequate to resolve my package conflicts. Also there's a strange thing where the grub menu seems not to be properly interpreted, but eventually I get the splash screen with "/ is not ready yet or not present. Continue to wait; or press S to skip or M to recover manually." Manual recovery puts me in a single user shell where I can easily remount / as rw and bring up the network. If I become myself, the command line seems quite robust, but, there seems to be no way to get X11 going.

  Read the article

• HP Envy 15 3040nr sound issues

  - by Lenny

  I have successfully set up my Envy 15" for Ubuntu 12.04 except for the sound, anyone have any ideas about how to get it working? I had to blacklist snd-usb-audio to my alsa to stop pulseaudio from freezing on login and logout, but now no sound plays. Could anyone provide me with some guidance? lspci info 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:01.2 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] 09:00.0 Network controller: Intel Corporation Centrino Advanced-N 6230 (rev 34) 0a:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 10:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) 11:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)

  Read the article

• NVIDIA proprietary driver logging me to console instead of GUI

  - by Woozie

  Firstly i want to apologise for any mistakes, English is not my native language. My problem is I can't get NVIDIA proprietary drivers to work. I tried to install it on Ubuntu 12.04.1 32 and 64 bits, Ubuntu 12.10 Beta 2, Linux Mint 13 Cinnamon 64 bits and openSUSE 12.2 64 bits and the error code and symptoms (logging to tty1 instead of GUI logging, low-res bootscreen) are the same for all of these distros. Right, I didn't tell what's the error code. It appears on sudo startx. NVIDIA: could not open the device file /dev/nvidia0 (Input/output error). I know that's the common problem, but I tried to blacklist or even remove the noveau drivers, install NVIDIA driver from repo/from official script/in "Additional drivers", editing xorg.conf and using Xorg -configurate and nvidia-xconfig, actualizing the kernel and entire distro and many, many things that I don't remember. But the problem is even better: entire Cinnamon (Mint) is freezing during the work. I found the error code, which appears during the freeze: Oct 1 20:57:17 WoozieLaptop kernel: [ 308.120176] [drm] nouveau 0000:01:00.0: PFIFO_CACHE_ERROR - Ch 4/1 Mthd 0z0060 Data 0xbcef0201 My Xorg.0.log is here. It was made on Ubuntu 12.04.1 after installing NVIDIA drivers (obviously). inxi -G from Mint: Graphics: Card: NVIDIA GT216 [GeForce GT 240M] X.org: 1.11.3 drivers: (unloaded: nvidia) FAILED: nouveau,vesa,fbdev tty size: 80x25 Advanced Data: N/A for root out of X lspci -k | grep -A2 VGA from Mint: 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 240M] (rev a2) Subsystem: Lenovo Device 38ff Kernel driver in use: nvidia My hardware is: Lenovo IdeaPad Y550 Intel C2D T6600 NVIDIA GeForce GT 240M 4 GB of RAM Any help will be appreciated. This problem totally disabled my laptop from daily using. Cheers, Woozie

  Read the article

• Missing driver ASUS PCE-N53 11n N600 PCI-E Adapter

  - by oyse

  I have problems with getting an Asus PCE-N53 11n N600 PCI-E Adapter card to work on my desktop computer. As far as I can tell no drivers are installed for the card. I know I can manually download the drivers directly from Asus, but I would rather not go that route. If there are anyone that knows about any packages or other things I can do to make this work would be much appreciated. Some systems details: $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise $ sudo lshw -C network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: d4:3d:7e:03:b9:1d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.0.173 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:43 ioport:d000(size=256) memory:f2104000-f2104fff memory:f2100000-f2103fff *-network UNCLAIMED description: Network controller product: Ralink corp. vendor: Ralink corp. physical id: 0 bus info: pci@0000:04:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7100000-f710ffff $ lsmod Module Size Used by nvidia 12319264 51 vesafb 13844 1 snd_hda_codec_hdmi 32474 1 joydev 17693 0 bnep 18281 2 rfcomm 47604 0 bluetooth 180104 10 bnep,rfcomm snd_hda_codec_realtek 224173 1 snd_seq_midi 13324 0 ppdev 17113 0 snd_rawmidi 30748 1 snd_seq_midi usbhid 47199 0 hid 99559 1 usbhid nouveau 774641 0 parport_pc 32866 1 snd_hda_intel 33773 5 ttm 76949 1 nouveau snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel drm_kms_helper 46978 1 nouveau drm 242038 3 nouveau,ttm,drm_kms_helper snd_seq_midi_event 14899 1 snd_seq_midi snd_hwdep 13668 1 snd_hda_codec snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event i2c_algo_bit 13423 1 nouveau mxm_wmi 12979 1 nouveau wmi 19256 1 mxm_wmi mac_hid 13253 0 snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec psmouse 97362 0 video 19596 1 nouveau snd_timer 29990 2 snd_seq,snd_pcm snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 20 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_pcm,snd_timer,snd_seq_device serio_raw 13211 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp r8169 62099 0

  Read the article

• I am trying to install Kubuntu, but I get a metalink error

  - by Brook Bentley

  It looks like the ISO metalink is broken for the Kubuntu install from Wubi. Can you please fix this? Or, help me figure out what I'm doing wrong. I receive the following error: 'An error occurred: Cannot download the metalink and therefore the ISO For more information, please see the log file: c:\users\bbentley\appdata\local\temp\wubi-12.04-rev269.log' The log file contains the following errors: '08-30 14:28 DEBUG TaskList: ### Running get_metalink... 08-30 14:28 DEBUG downloader: downloading http://releases.ubuntu.com/kubuntu/12.04/kubuntu-12.04-desktop-amd64.metalink > C:\ubuntu\install 08-30 14:28 ERROR CommonBackend: Cannot download metalink file err=[Errno 14] HTTP Error 404: Not Found 08-30 14:28 DEBUG downloader: downloading http://cdimage.ubuntu.com/kubuntu/daily-live/current/precise-desktop-amd64.metalink > C:\ubuntu\install 08-30 14:28 ERROR CommonBackend: Cannot download metalink file2 err=[Errno 14] HTTP Error 404: Not Found 08-30 14:28 DEBUG TaskList: ### Finished get_metalink 08-30 14:28 ERROR TaskList: Cannot download the metalink and therefore the ISO Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\backend.py", line 595, in get_iso File "\lib\wubi\backends\common\backend.py", line 406, in download_iso Exception: Cannot download the metalink and therefore the ISO 08-30 14:28 DEBUG TaskList: # Cancelling tasklist 08-30 14:28 DEBUG TaskList: # Finished tasklist 08-30 14:28 ERROR root: Cannot download the metalink and therefore the ISO Traceback (most recent call last): File "\lib\wubi\application.py", line 58, in run File "\lib\wubi\application.py", line 132, in select_task File "\lib\wubi\application.py", line 158, in run_installer File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\common\backend.py", line 595, in get_iso File "\lib\wubi\backends\common\backend.py", line 406, in download_iso Exception: Cannot download the metalink and therefore the ISO'

  Read the article

• Is it possible to set a VPN through Tor? and have functionality for Software Updates?

  - by moazhmi

  Gday, I have been trying to do a software update on Trusty both on terminal and software update app but that hasnt been successful, apparently my ISP has a broken transparent proxy. moazhmi@moazhmi-K52F:~$ wget -S http://extras.ubuntu.com/ubuntu/dists/trusty/InRelease --2014-06-04 17:34:52-- http://extras.ubuntu.com/ubuntu/dists/trusty/InRelease Resolving extras.ubuntu.com (extras.ubuntu.com)... 91.189.92.152 Connecting to extras.ubuntu.com (extras.ubuntu.com)|91.189.92.152|:80... connected. HTTP request sent, awaiting response... HTTP/1.1 200 OK Content-Type: text/html; charset=UTF-8 Content-Length: 213 Date: Wed, 04 Jun 2014 14:34:52 GMT Server: Apache/2.2.22 (Ubuntu) Connection: Keep-Alive Vary: Accept-Encoding Length: 213 [text/html] Saving to: ‘InRelease’ 100%[======================================>] 213 --.-K/s in 0s 2014-06-04 17:34:52 (22.1 MB/s) - ‘InRelease’ saved [213/213] I was advised to refer back to the ISP with a complaint but that has returned with peanuts. My Question is - Is it possible to set a VPN through TOR , i.e whereas I can run software updates through terminals or the app . the browsing is out of question here as I need to update which I am not able to do / only on 12.04.

  Read the article

• Is a disk/ata timeout exception dangerous?

  - by j-g-faustus

  I have a few hard drives in mdadm RAID 5 configured to go to standby after a few minutes of inactivity. (Using hdparm.conf spindown_time.) At irregular intervals I get messages like these in dmesg: [ 1840.251661] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1840.251722] ata4.00: failed command: SMART [ 1840.251758] ata4.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [ 1840.251759] res 40/00:14:50:2e:04/00:00:02:00:00/40 Emask 0x4 (timeout) [ 1840.251858] ata4.00: status: { DRDY } [ 1840.251888] ata4: hard resetting link [ 1840.600742] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1840.601521] ata4.00: configured for UDMA/133 [ 1840.601547] ata4: EH complete [337877.713988] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [337877.714019] ata4.00: failed command: SMART [337877.714038] ata4.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [337877.714039] res 40/00:04:90:10:81/00:00:00:00:00/40 Emask 0x4 (timeout) [337877.714089] ata4.00: status: { DRDY } [337877.714107] ata4: hard resetting link [337878.063085] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [337878.063743] ata4.00: configured for UDMA/133 [337878.063764] ata4: EH complete I think the exception is caused by smartd when a drive does not wake up quickly enough. There are no issues (that I can tell) in accessing the drives normally through the file system - it takes a few seconds longer than normal when they are asleep, but there are no exceptions. Is this something I should worry about, as a potential symptom on something that could corrupt a drive over time? Or can I safely ignore it as part of normal operation? Edit: By request: smartctl -a for sdaand sde, both disks are members of the array. If ata4is the same as scsi-4 then sde is the one that gave the error above, according to /dev/disk/by-path.

  Read the article

• Touchpad right click doesn't work on HP Envy 14 beats

  - by jdrageme01

  I have Ubuntu 12.04 lts 64 bits on my HP envy 14 beats. When I try to click with the right click button it doesn't work. Only works click in the touchpad directly and with usb mouse. 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) 00:01.1 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0105] (rev 09) 00:01.2 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0109] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) 00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5) 00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5) 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05) 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] [1002:6741] 09:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:4238] (rev 3e) 0a:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) 0b:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04)

  Read the article

• Why can't I install from software center?

  - by user64720

  There was a problem upgrading to Firefox 13. This error kept returning: /var/cache/apt/archives/firefox_13.0+build1-0ubuntu0.12.04.1_i386.deb W: Waited for dpkg --assert-multi-arch but was not there - dpkgGo (10: There are no "child" processes). Now it seems that there is some problem with dpkg and I can't install anything from software center. I already tried to clean previous packages with sudo rm /var/lib/apt/lists/* -vf and then sudo apt-get update, it didn't work. When running sudo dpkg --configure -a, I get this: dpkg: problems with dependencies prevent the configuration of firefox-globalmenu: firefox-globalmenu depends on firefox (= 13.0+build1-0ubuntu0.12.04.1); however: The package is not installed. dpkg: error while processing firefox-globalmenu (--configure): problems com dependencies - leaving unconfigured There has been found errors while processing: firefox-globalmenu What should I do to fix this?? EDIT: I don't have the necessary expertise to understand why what I did worked and what was causing the conflict, but anyway, since there was a problem with firefox-globalmenu:, I went to synaptics package manager, I removed this particular package and reinstalled it. After that, I was able to install Firefox from synaptics and also any other applications from software center. However, still there was a problem, when running sudo apt-get update, the following kept returning: Failed to get gzip:/var/lib/apt/lists/partial/archive.ubuntu.com_ubuntu_dists_precise_main_binary-i386_Packages Verification code hash doesn't match. E: Some archives index failed at being downloaded. They have been ignored, or older copies are used instead. So I typed sudo rm /var/lib/apt/lists/* -vf in terminal and then again sudo apt-get update and everything is fine now. I did this before an answer was posted, anyway I agree the problem was that particular package and its removal. So I'll mark the below answer as accepted.

  Read the article

• How do I force Wubi to install a 32-bit version?

  - by marx

  I'm using Windows 8 (32bit) customer preview and installing WUBI Ubuntu 12,04.1. I down loaded 32 bit installer from ubuntu dot com, The wubi installer says AMD 64 xt. I had a previous 12,04 install and in the terminal typed in uname -a, it say's 64 bit. I also opened detail from the system and it read 64 bit system. My question is: how to ensure that a windows/wubi/ubuntu/installer is 32 bit or 64 bit BEFORE making a commitment to install from the wrong wubi install? After posting this I did another wubi installation. Signed into ubuntu, opened system settings, open Details: OS Type 64 Bit. Why is it doing this? I have a 32 Bit machine: Toshiba Satellite A-215 S5818 (previous Windows Vista)<--wiped clean. from an earlier installation of Ubuntu 10.10 which worked, in feb 2012 i installed Win8 Customer Preview Release (32Bit) which took over the BOOT order and 140 GB Hard Disk. I am trying patiently to install WUBI 32 BIT Ubuntu 12.04 Install, it keeps returning 64 BIT install.. Why?? I should also mention that i was successful in a dual boot install ubuntu 10.04/win8 32 bit install and upgraded to 12.04 which is fine for now, but i want a win8/wubi/ubuntu12.04 32 bit working not 64 bit breaking what i have. thank you.

  Read the article

• wget has a 4 second delay

  - by guisius

  Hello. I have tried to wget a page with windows/mac, and the response is instant while the linux vesion needs to wait for 4 seconds before it shows the response. I just hope this can be solved. More information added: in Ubuntu : wget xxx://192.168.0.135/test.cgi?cmd= -O test.txt --2011-03-04 14:21:17-- xxx://192.168.0.135/test.cgi?cmd= Connecting to 192.168.0.135:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `test.txt' [ <=> ] 17 --.-K/s in 0s 2011-03-04 14:21:22 (1.88 MB/s) - `test.txt' saved [17] while in Mac OS : wget xxx://192.168.0.135/test.cgi?cmd= -O test.txt --2011-03-04 14:22:33-- xxx://192.168.0.135/test.cgi?cmd= Connecting to 192.168.0.135:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `test.txt' [ <=> ] 17 --.-K/s in 0s 2011-03-04 14:22:33 (755 KB/s) - `test.txt' saved [17] in ubuntu it delays 4 seconds while windows and mac will not i believe it may related to some setting in the network config such as packet size , window frame , but i have no idea to set this PS: because the limit of the post not allow to post the url so i mark this as xxx

  Read the article

• USB flash module giving errors

  - by vshenoy

  Hi, I have a SATA USB flash module which was earlier running a 2.4 linux kernel (2.4.36.6) and on which now I am trying to install ubuntu server 10.04.1 LTS. I have two such USB flash modules and on one of them the installation process itself giving these errors: sd 4:0:0:0 [sda] Device not ready sd 4:0:0:0 [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 4:0:0:0 [sda] Sense Key : Not Ready [current] sd 4:0:0:0 [sda] Add. Sense: Medium not present sd 4:0:0:0 [sda] CDB: Write(10): 2a 00 00 05 48 02 00 00 04 00 end_request: I/O error, dev sda, sector 46114 usb 1-1: reset high speed USB device using ehci_hcd and address 2 Buffer I/O error on device sda1, logical block 172033 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 172034 lost page write due to I/O error on sda1 on the other the installation is successful, but after a day or two of running the machine hangs because of kernel spewing these messages: Remounting filesystem read-only EXT2-fs error (device sda1): read_block_bitmap: Cannot read block [bitmap - block_group = 105, block_bitmap = 860161] EXT2-fs error (device sda1): ext2_get_inode: unable to read inode block - inode=13083, block=24683 ext2_free_inode: bit already cleared for inode 83966 and the machine needs to be hard rebooted. On both the systems SCSI emulation with usb_storage driver is being used to detect the module. Here is the output of /proc/scsi/scsi on 2.4: # cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 02 and on 2.6: # cat /proc/scsi/scsi Attached devices: Host: scsi6 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 00 i.e. only 'ANSI SCSI revision:' is shown as different, although I am not sure if this can cause any problem. Really appreciate if someone can point as to how to debug this issue or any mailing list where I can further ask questions about this.

  Read the article

• Ubuntu 12.04 won't shut down - stopping winbind daemon

  - by jan

  My Precise Pangolin sometimes won't shut down - the screen is black with text on it. Mostly last line says something like "stopping winbind deamon" (sometimes also virtualbox, which is above winbind daemon; edit: sometimes the last line says "running unattended updates") and it stays like this for about ten miutes. Then I usually hold the power button for 5s to shut it down. It's very unpredictable - sometimes the computer shuts down without problem and sometimes it hangs. I've tried many ways to shut it down: HW button, panel applet, sudo shutdown -h now, sudo poweroff, sudo halt, etc. even sudo reboot or restart from panel applet have this problem. Sometimes it works ok but every method named hung at least once on the same (damned) line. My specs: FUJITSU SIEMENS LIFEBOOK E8310, Intel Core2 Duo T7300 @ 2.00GHz, 3GB RAM, GPU: Mobile Intel(R) 965 Express Chipset Family Ubuntu 12.04.2 32bit, 3.5.0-41-generic kernel (but it did it on older kernels and 12.04.x systems too). Any ideas what should I try next? Thanks a lot! Jan

  Read the article

• WiFi can't connect after suspend

  - by CyberOPS

  I've had this problem since Ubuntu 11.10 (my first install) but I was able to get around this issue with this answer. After I installed Ubuntu 12.04.1 I tried to use the same fix as before but I couldn't get it to work. I've also tried a couple other different fixes I found around the web but they didn't work. Basically here's what happens: I can see all the networks in my area. When I try to connect to one of them it never connects, it keeps disconnecting. After a little bit it asks for the password again but its already filled in correctly. If I hit okay it will do the exact same thing again. So does anyone know how I can get this fixed? INFO: Computer: HP Pavilion dv6t-6b00 CTO Quad Edition Entertainment Notebook PC Network Card: Intel® Centrino® Wireless-N 1000 OS: Ubuntu 12.04.1 (x64) dual booting with Windows 7 (x64) (*Not using Wubi*) Wireless Card Driver: iwlwifi UPDATE: I was about to reinstall with the DVD I made with the ISO from the official source but discovered the same issue happens on the disc's Ubuntu preview feature. I still was unable to fix it as before. I also tried the Xubuntu demo, and the same. Re installing the driver hasn't worked either.

  Read the article

• Install Problems on ASUS X401A Notebook

  - by tired_of_trying

  okay... I tried many approaches to install Ubuntu 12.xxx on my new Asus notebook with varying degrees of failure... First: I'm not a newbie but I'm as frustrated as one! Install background: Install from USB DVD drive: The install went well. Re-booted machine. choose ubuntu and it errors with a MBR file error (can't remember the exact wording - something to do with missing the file. Choosing to boot W7 works fine. Install from USB Stick: Couldn't get machine to recognize the .iso Install into Oracle's Vbox: Got the boot splash screen, then hangs with a zillion errors. Note: I didn't have any problems installing ubuntu in Vbox on my iMac and it run's great. Installed using wubi: Installed fine but get errors when booting ubuntu (it doesn't find the needed wubi files). I downloaded to the C: drive and tried installing from there - no luck. For kicks: I tried running Slax Linux .iso from a USB stick and it runs fine. Some Questions: Did I use the correct .iso? (I tried 12.04.0 and 12.04.1 both 32 and 64 bit versions. I simply downloaded them from the download link and didn't use/look for an alternate version. Do I need to do something special when burning the .iso to disc? What? I did read tons of posts but, no luck with finding the solution. Any help is appreciated... thanks

  Read the article

• ubuntu precise high hard drive I/O

  - by pavolzetor

  on ubuntu precise, all apps starts slowly, and my hard drive is all time in use. What is the cause? it was never before, even nautilus takes a lot time to load, boot is also slower. top - 18:37:05 up 1:07, 1 user, load average: 2.03, 2.34, 2.25 Tasks: 182 total, 1 running, 180 sleeping, 0 stopped, 1 zombie Cpu(s): 30.2%us, 7.2%sy, 1.4%ni, 53.9%id, 7.1%wa, 0.0%hi, 0.2%si, 0.0%st Mem: 3941576k total, 3522048k used, 419528k free, 50156k buffers Swap: 0k total, 0k used, 0k free, 1827640k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2508 pk 20 0 1018m 189m 28m S 4 4.9 22:28.04 plugin-containe 1290 root 20 0 82336 16m 1492 S 2 0.4 0:04.41 landscape-clien 1305 root 20 0 97280 22m 5584 S 2 0.6 0:01.57 landscape-manag 4201 pk 20 0 17328 1312 924 R 2 0.0 0:00.02 top 1 root 20 0 24436 2364 1268 S 0 0.1 0:00.68 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0 0.0 0:00.45 ksoftirqd/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0 0.0 0:00.02 watchdog/0 8 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 10 root 20 0 0 0 0 S 0 0.0 0:00.43 ksoftirqd/1 12 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/1 13 root 0 -20 0 0 0 S 0 0.0 0:00.00 cpuset

  Read the article

• Can't boot freshly burned Ubuntu cd

  - by user89004

  So I just burned a Ubuntu 12.04.1 powerpc .iso on a cd for my iMac G5 running Mac OS X 10.4.11 and it won't even recognize the cd. I burned it on my dad's Windows 7 laptop as the process is way easier (just 2 clicks). Mac OS X 10.4.11 gives me an error when it starts and when the CD is in saying "the disk you inserted was not readable by this computer". What's funny is that I burned a Ubuntu Minimal .iso on a CD and it would totally read that and even boot it though it gave me some errors afterwards and I couldn't install. I even tried going into openfirmware and hitting boot cd:,\tbxi but I get the error "Warning sector size mismatch can't OPEN cd:,\tbxi Can't open device or file" Was there something wrong with the .iso I burned? Mac OS X 10.4.11 won't even mount that .iso it tells me that the HFS file system is corrupt or something, but I know the .iso doesn't contain HFS file system. Any help? I downloaded the .iso from http://cdimage.ubuntu.com/releases/precise/release/ubuntu-12.04-desktop-powerpc.iso

  Read the article

• Invitation to the Oracle EDGE Applications Partner Roadshow

  - by Hartmut Wiese

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 This is a unique opportunity for any Oracle Alliance & Channel Managers & their Partners to connect with the Oracle Edge Sales and Management Team to understand the relevance and value of the entire Oracle Edge Portfolio of Applications in solving complex customer issues and supporting a variety of evolving Partner Go-To-Market business models. Oracle Edge Applications (PLM, VCE, VCP, MDM, GRC, OPA) With strong participation from the key Oracle Edge Applications Sales business leaders, attendees will get the opportunity to hear about the benefits of the Oracle Edge Solutions within three different value-added contexts: Value 1: Oracle Edge Application Strategy Value 2: Oracle Value Chain Transformation Vision Value 3: Individual Application Business Line Differentiators Following on from the morning presentations, Oracle Partners will also get the opportunity in the afternoon to challenge and discuss the value of Oracle Edge Applications in the context of their own Go-To-Market business models. These sensitive discussions will be managed via focused 1-2-1 breakout meetings with the relevant Oracle Edge Applications Sales Business Leaders. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} When Where To Register Tuesday, July 09th 2013 09 am to 04 pm Utrecht Register now Tuesday, July 16th 2013 09 am to 04 pm London Register now Wednesday, August 28th 2013 09 am to 04 pm Paris Register now IIMPORTANT NOTE: ONLY 60 ATTENDEE PLACES AVAILABLE PER LOCATION - BOOK NOW TO AVOID MISSING OUT. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} There is a strict limit to the number of people who can attend this event based on site logistics for the day. Please note that Partners will be given priority over Oracle personnel registrations. Partners however may only register a maximum of 2 personnel from their company plus the supporting local Oracle Alliance & Channel Manager /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Please help for change wallpaper on terminal where image from http (ubuntu 12.04)

  - by Yan Fachmi

  I need to change the background of my desktop in Ubuntu 12. 04 with a command in terminal, in order to make a script with bash. Does anyone know how to do it? but i want the image from internet... i know if i use local image would like this : gsettings set org.gnome.desktop.background picture-uri file:///home/icorner/wallpaper/curr.jpg but if i use something like this wont work gsettings set org.gnome.desktop.background picture-uri http://www.sergiuhelldragoon.com/wp-content/uploads/2012/04/dota_2_wallpaper_1_1280x800_by_zadelim.jpg Please anyone or somebody?... Thanks & regards, Yan Fachmi

  Read the article

< Previous Page | 57 58 59 60 61 62 63 64 65 66 67 68  | Next Page >